Easy Barrier lamiera

WIRE MESH PERIMETER PROTECTION
DISTANCE LESS THEN 20 mm

EASYBARRIER LAMIERA

Like the mesh system, EASY BARRIER LAMIERA, respects the safety parameters provided for by the harmonized standards.

ALL EASY BARRIER ANTI-INTRUSION BARRIERS COMPLY WITH THE EUROPEAN REGULATIONS
  • Machinery Directive 2006/42/EC
  • UNI EN 12100
  • UNI EN 13857
  • UNI EN ISO 14120

METAL SHEET PANELS

THICKNESS: 1,5 mm

  • EASY BARRIER LAMIERA panel h 2000 mm (thickness 1,5 mm)
  • EASY BARRIER LAMIERA metal sheet panel with window
The metal sheet modular panels are the core of the EASY BARRIER LAMIERA perimeter protection system.
DISTANCE FROM THE DANGER ZONES < 20 mm.

The metal sheet panels are intended for those applications, which require a maximum protection, for example, welding islands.

They are available in different widths and in two heights, H = 1890 and H = 2390 mm, respectively for H = 2000 and H = 2500 mm protections. There are also two types of adjustable width panels, KALIBRO L and KALIBRO R, to obtain precise measurements in the length of a protection wall.

POSTS

TUBULAR POST 50x50 mm

  • Tubular post 50x50 mm
The EASY BARRIER LAMIERA panels can be combined with 50 x 50 mm tubular posts.

MEKKANO LAMIERA GATES

  • Gate with metal sheet door
Like the mesh system, MEKKANO LAMIERA, are made using the MEKKANO construction system without welding, having the required customizations and ready immediately for installation.
Upon request it is possible to fit them with portholes with adiactinic glass or with polycarbonate.

KALIBRO LAMIERA

  • panel for anti-intrusion metal sheet barrier
  • panel for anti-intrusion metal sheet barrier
KALIBRO L
  • Adjustable panel for anti-intrusion metal sheet barrier
  • It permits to increase or reduce the length of the barrier
KALIBRO R
  • Adjustable panel for anti-intrusion metal sheet or grid barrier
  • It permits to increase or reduce the length of the barrier

SAFETY


DELLA CASA RETI designs and produces the components of the EASY BARRIER perimeter protection system in accordance with the standards and technical requirements contained in the following reference regulations:

  • UNI EN-ISO 12100 - Machinery safety – General design principles – Risk evaluation and risk reduction.

  • UNI EN-ISO 13857 - Machinery safety - Safety distances required to prevent upper and lower limbs from reaching dangerous areas. The rule sets out the safe distances required to prevent upper and lower limbs from reaching dangerous areas.

  • UNI EN–ISO 1420 - The rule defines the general requirements for the design and construction of shelters whose main object is to protect persons from mechanical dangers. Machine safety, dangerous machine, prevention of accidents, safety device, protection from mechanical dangers, danger, design, material, category, safety, inspection, information.
Logo TÜVDella Casa reti s.r.l.
via dell’Industria, 22 - 41122 Modena - Italy
phone +39 059 283390 - fax +39 059 280975
info@dellacasa.net | cookie
VAT No.: IT02819320363
REA registration No.: MO-334078
project and communication: cocchi&cocchi
development: typomedia